then youll connect another set of RCA's going from your interface output to the TAPE in on your mixer. youll use some RCA cables to go from the TAPE outs of your mixer to the Input on the interface. but ill assume that you are.first step will be connecting your mixer to your interface.
You would use 'input' on the subwoofer to feed from the outputs of the mixing desk, then use 'high pass out' on the subwoofer to connect your Alto's. Howdy you didn't mention if you were using the usb interface (UCA-202 i think) that came with your mixer. There are plenty of examples of alternative subwoofers which will do this, let me provide one here: However the cost of this type of equipment may be more expensive than actually buying a subwoofer with proffessional line level inputs/outputs, which actually does that without additional equipment. Using this example you can use input-1 and output-1 to do exactly what you need. This can be done with some equipment, and here is an example: 'convert those from 'balanced / professional line level' to 'unbalanced / consumer line level'Īs a picture is a thousands words, something like this:Īs you can see, I have drawn two 'box's' in the picture, which will have to do the conversion.
There are two problems we need to overcome: However as nobody else has commented, I will give you an answer on how you can do this. At first I was reluctant to answer this question, as I believe in order to do this properly, will cost more than the value of said sub-woofer.
